Automatic feeders are convenient, but kibble dust and food oils can collect in the bowl, hopper, and dispensing chute. Cleaning the feeder regularly helps keep food areas fresh and can prevent buildup from interfering with dispensing.
The exact parts you can remove—and whether any parts are dishwasher-safe—depend on the model. Check the manufacturer’s manual before taking your feeder apart.
Affiliate Disclosure: This post contains affiliate links. As an Amazon Associate, PurrYork Pets earns from qualifying purchases at no extra cost to you.
What You’ll Need
- Warm water
- Mild dish soap
- A soft sponge or cloth
- A small, soft brush for crumbs and kibble dust
- A clean towel or drying rack
Avoid using abrasive pads or sharp tools that could scratch plastic or damage a sensor.
How to Clean an Automatic Cat Feeder
1. Unplug the Feeder and Empty It
Unplug the feeder before cleaning. If the manual allows battery backup, remove the batteries too, so the feeder cannot start dispensing while you’re handling it.
Remove the remaining food from the hopper and bowl. Discard food that looks damp, stale, or contaminated. Don’t pour old food back into the feeder after cleaning.
2. Remove the Parts the Manual Allows You to Wash
Depending on the model, the food bowl, hopper, lid, and dispensing components may come apart for cleaning. Follow the manual’s instructions so you don’t force a latch or remove a part that isn’t meant to come off.
Keep the motorized base and electronic components separate. For example, PETKIT’s feeder instructions say to wash removable food-contact parts but wipe the main unit rather than immersing it. See the manufacturer’s cleaning instructions.
3. Wash the Bowl and Removable Food Parts
Wash the bowl and other washable parts with warm water and mild dish soap. Use a soft sponge or cloth to remove food residue and oily film, then rinse thoroughly.
The FDA recommends washing pet food bowls and food-handling utensils with soap and hot water after use. FDA safe-handling guidance.
4. Brush Crumbs From the Chute
Use a dry, soft brush to sweep kibble crumbs and dust from the dispensing chute and accessible mechanisms. If the manual says a component can be washed, remove it and wash it as directed. Otherwise, keep it dry and brush it gently.
Don’t push a knife, metal pick, or other sharp tool into the chute. It can damage the mechanism or sensor.
5. Wipe the Electronic Base
Wipe the main unit with a soft, slightly damp cloth. Keep water away from the motor, wiring, display, and charging or power connections. Don’t rinse or immerse the base unless the manufacturer explicitly says it is waterproof.
6. Let Everything Dry Completely
Air-dry all washable parts until there’s no moisture left, including inside seams, corners, and the chute. Reassemble the feeder only when every part is fully dry. Moisture trapped near dry food can cause it to clump or spoil.
7. Reassemble and Test the Feeder
Put the feeder back together according to its manual. Refill the hopper with fresh food, reconnect power, and run a manual feeding test. Check that food drops into the bowl and that the app or schedule still works if your feeder has WiFi.
How Often Should You Clean an Automatic Cat Feeder?
A simple routine is to wash the bowl daily and clean the hopper and chute when you refill the feeder or notice crumbs, oily residue, or a musty smell. Some manufacturers give a specific cleaning interval, so follow your model’s instructions if they differ.
Clean the feeder sooner if wet food, water, or anything other than dry kibble has gotten into it. Empty and dry the affected parts before adding fresh food.
Tips to Keep the Feeder Clean
- Use only the food type and kibble size recommended for your feeder.
- Keep the hopper lid closed to limit dust and moisture.
- Don’t top off old food indefinitely; empty and clean the hopper periodically.
- Wash your hands before and after handling pet food.
- Don’t use the feeder bowl as a scoop for filling the hopper.
- Check the chute during refills so you can catch crumbs or a developing blockage early.
Frequently Asked Questions
Can I put automatic feeder parts in the dishwasher?
Only if the manufacturer says those specific parts are dishwasher-safe. Some bowls may be dishwasher-safe while the hopper, lid, or dispensing parts are hand-wash only. Keep the electronic base out of the dishwasher.
Can I wash the whole feeder with water?
No. Most automatic feeders contain electrical components. Wash only the removable parts approved by the manufacturer, and wipe the base with a damp cloth.
What should I do if kibble is stuck in the chute?
Unplug the feeder, empty the hopper, and use a soft brush to remove crumbs from the accessible chute. Check that you’re using kibble within the size range listed in the manual. Don’t force stuck food through with a sharp object.
Can I use disinfectant or bleach?
For routine cleaning, use mild dish soap and water unless the manufacturer says otherwise. If the feeder has contacted recalled or contaminated food, follow the relevant food-safety and manufacturer guidance for cleaning and sanitizing it.
Final Thoughts
Cleaning an automatic feeder is straightforward: unplug it, wash the approved removable parts, keep water away from the electronics, and let everything dry completely before refilling. A clean bowl and a quick check of the chute can help your feeder dispense meals as expected.
If you’re comparing models, see Best Automatic Cat Feeders: The Complete Buying Guide.

2 thoughts on “How to Clean an Automatic Cat Feeder”